Ikan GA230-PTZ Aluminum Tripod with Rising Center Column and Quick Release Plate for PTZ Cameras

SKU: GA230PTZ

Ikan GA230-PTZ Aluminum Tripod with Rising Center Column and Quick Release Plate for PTZ Cameras
The GA230-PTZ from E-Image combines a durable Aluminum Tripod with a Quick Release Plate for an ideal solution for your PTZ camera. This tripod is designed for steady use, light-to-moderate loads, and a super-wide height range.

Key Features: 
  • Convenient Tripod for PTZ Camera Setups
  • Extra-Tall Tripod Legs with Geared Rising Center Column
  • Maximum Height of 92″, Minimum Height of 33.25″
  • Recommended Payload of 26.5 lb.
  • Mid-Level Spreader
  • Individual Locks for Each Leg Stage
  • Retractable Foot Spikes for Soft Ground
  • Adjustable Ratcheted Release Screw
  • Plate Mountable from Rear or Front
  • Plate Includes 1/4″-20 and 3/8″-16 Mounting Screws and Registration Pin
  • Plate Includes Safety Locks and Safety Release
  • Includes Stone Bag

IDEAL PTZ SOLUTION
While a tripod is still absolutely necessary, using a PTZ camera eliminates the need for a fluid head. The GA230-PTZ replaces the fluid head with a P6 Quick Release Plate to ensure stability.

SUPER-WIDE HEIGHT RANGE
The geared center column of the tripod can extend 18″ and lock in place for high-angle shots. This tripod has a height range of 33.25″ to 92″, and is topped off by a flat mounting base with a 3/8-16 threaded screw.

STABILITY

The GA230-PTZ can hold up to 26.5 lbs and comes packaged with a flat quick release plate for extra stabilization. Also included is a camera plate that can slide forward or backward before being secured by the lock-down lever. Additionally, a safety release ensures that the camera won’t fall off the plate if it’s not secured. The camera plate is also interchangeable with Manfrotto 501 plates. A stone bag is also included to weigh down your tripod for added stability.

MULTIPLE MOUNTING POINTS
A threaded 1/4″-20 mounting recess is conveniently located at the base of the central column for mounting accessory arms. These will allow for mounting wireless transmitters, lights, or especially monitors, which you might need if your camera is set at the tripod’s full extension. Additionally, the quick-release plate itself also includes two mounting recesses; a 1/4″-20 thread and a 3/8″-16 thread. These would be ideal for mounting lighter accessories like a shotgun mic, LED light, or any other accessories you might need.

BUBBLE LEVEL
The quick release plate incorporates a bubble level to assure proper head alignment when shooting.
Brand: E-Image
Bubble Level: Yes
Build Material: Aluminum
Compatible Mount: Manfrotto 501
Fixture Weight: 11.6 lbs
Head Payload Capacity: 26.5 lbs
Height Range: 33.25″ - 92"
Leg Lock Type: Twist
Leg Payload Capacity: 26.5 lbs
Leg Stages/Sections: 2-Stage/3-Section
Max. Height: 92"
Min Height: 33.25"
Mounting Plate: Manfrotto 501
Mounting Points: 1x 3/8″-16 thread ~ 2x 1/4"-20 threads
Payload: 26.5 lbs
Quick Release/Wedge Plate: Quick Release
Spiked/Retractable Feet: Yes
Spreader Type: Mid-Level
UPC Code: 847983032587
What's Included:
  • 1x GA230 Rising Column Tripod Legs
  • 1x P6 Quick Release Plate
  • 1x Tripod Shoulder Strap
  • 1x Stone Bag