Panasonic Integrated Outdoor PTZ Camera IP65
PRODUCT DETAILS
The AW-HR140 is an integrated remote camera system that incorporates an outdoor housing, camera, lens and pan-tilt head and maintains stable shooting performance in the toughest of environments. It is equipped with the same DSP and full HD 3MOS sensors as the AW-HE130 which results in high sensitivity, high S/N ratio, and high resolution due to its advanced video processing.
KEY FEATURES
The AW-HR140 Gives You Broadcast Quality Where Other Cameras Can't
The camera features 1/2.86-type full HD 3MOS sensors and a motorized 20x zoom lens. Sophisticated image processing affords high sensitivity with low noise and horizontal resolution of 1000 TV lines. The water and dust-resistant case likewise resists salt damage and features a wiper. Stable images are captured with vibration compensation provided by the newly-developed Dynamic Image Stabilizing System (D.I.S.S.), a valuable asset in the event of high winds or related unstable weather conditions.
Super Haze Reduction
The AW-HR140 boasts haze-reduction technology -- valuable for outdoor environments such as weather reporting -- for ensuring optimal image reproduction. In certain situations, picture contrast may be low as result of environmental fog or haze conditions, and the Haze Reduction function will optimize camera image settings appropriately to assure that the subject of shooting is as clear as possible.
Pro Output & Control
Output formats for the AW-HR140 include 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i, 1080/29.97p, 1080/25p, 1080/23.98p, 1080/29.97PsF, 1080/25PsF, 1080/23.98PsF, 720/59.94p and 720/50p.
Using an IP connection, up to 100 x HR140 cameras can be controlled by the AW-RP120G/RP50 remote camera controller via a switching hub. One camera can also be operated by up to five remote camera controllers via IP connection.
Rain, Sleet or Snow
Parts of the AW-HR140 have a special coating to protect against severe salt damage, enabling installations in areas subject to salt air. Polybutylene Terephthalate and Polyphenylene Sulfide materials are used to provide resistance to high-heat and abrasion, while frost, ice, and condensation are prevented by built-in heating in environments as cold as -15 ºC (5 ºF). Even in blizzards, snow that hits the glass surface melts off to maintain visibility.
The AW-HR140 is an integrated remote camera system that incorporates an outdoor housing, camera, lens and pan-tilt head and maintains stable shooting performance in the toughest of environments. It is equipped with the same DSP and full HD 3MOS sensors as the AW-HE130 which results in high sensitivity, high S/N ratio, and high resolution due to its advanced video processing.
KEY FEATURES
- 1/2.86 type full HD 3MOS sensors and Digital Signal Processor (DSP)
- 20x Optical Zoom (plus 1.4x Digital Extender)
- Hybrid Image Stabilizer (mechanical and optical, named DISS) for stable shooting performance
- Protection IP65, salt-resistant paint & includes wipers, heater and defroster (washer optional)
- Full HD Rugged Outdoor PTZ Camera with special functions: Intelligent, Haze Reduction & Night Mode
The AW-HR140 Gives You Broadcast Quality Where Other Cameras Can't
The camera features 1/2.86-type full HD 3MOS sensors and a motorized 20x zoom lens. Sophisticated image processing affords high sensitivity with low noise and horizontal resolution of 1000 TV lines. The water and dust-resistant case likewise resists salt damage and features a wiper. Stable images are captured with vibration compensation provided by the newly-developed Dynamic Image Stabilizing System (D.I.S.S.), a valuable asset in the event of high winds or related unstable weather conditions.
Super Haze Reduction
The AW-HR140 boasts haze-reduction technology -- valuable for outdoor environments such as weather reporting -- for ensuring optimal image reproduction. In certain situations, picture contrast may be low as result of environmental fog or haze conditions, and the Haze Reduction function will optimize camera image settings appropriately to assure that the subject of shooting is as clear as possible.
Pro Output & Control
Output formats for the AW-HR140 include 1080/59.94p, 1080/50p, 1080/59.94i, 1080/50i, 1080/29.97p, 1080/25p, 1080/23.98p, 1080/29.97PsF, 1080/25PsF, 1080/23.98PsF, 720/59.94p and 720/50p.
Using an IP connection, up to 100 x HR140 cameras can be controlled by the AW-RP120G/RP50 remote camera controller via a switching hub. One camera can also be operated by up to five remote camera controllers via IP connection.
Rain, Sleet or Snow
Parts of the AW-HR140 have a special coating to protect against severe salt damage, enabling installations in areas subject to salt air. Polybutylene Terephthalate and Polyphenylene Sulfide materials are used to provide resistance to high-heat and abrasion, while frost, ice, and condensation are prevented by built-in heating in environments as cold as -15 ºC (5 ºF). Even in blizzards, snow that hits the glass surface melts off to maintain visibility.
AW-HR140 Key Features
- 3MOS Sensor (1/2.86 MOS×3) up to 1080/60p Full HD capabilities inheriting sensor technology from the best in class AW-HE130 for superb low-light performance and color reproduction
- 20X Optical Zoom with integrated motorized ND (Neutral Density) filters with Digital Extender and Digital Zoom capabilities.
- 3G-SDI Output x2 (one with on screen display capabilities, and one with a clean feed)
- Intelligent Automatic Functionality : Gain, IRIS, electric shutter, ND, ATW Haze Reduction for increased image clarity and color in obscured outdoor conditions
- Integrated Wiper and trigger capability for external washer unit.
- IP65 Rating for Outdoor Environments
- Fiber Glass Body with Salt-Resistant Coating & Heat Resistivity
- Defroster for Cold Temperatures
- DC12 Power Input or PoE++ (Power Over Ethernet ++)
- Stereo Audio Input (mini XLR)
- Can be mounted desktop (face up) or ceiling/inverted (face down)
- Basic Mounting Hardware Included
| General | - |
|---|---|
| Power Requirements | DC 12 V to 21.8 V (DC IN connector) DC 42 V to 57 V (PoE++ power supply) |
| Current consumption | 3.1 A to 5.5 A (DC IN connector) 1.2 A (PoE++ power supply) |
| Ambient Operating Temperature | -15 °C to 45 °C (5 °F to 113 °F) (preheating is required when -5 °C (23 °F) or less) |
| Ambient Operating Humidity | 10% to 100% (no condensation) |
| Storage Temperature | -20 °C to 55 °C (-4 °F to 131 °F) |
| Storage Humidity | 10% to 95% (no condensation) |
| Mass | Approx. 9.0 kg (19.84 lb) |
| Dimensions (W x H x D) | 258 mm x 357 mm x 397 mm (10-5/32 inches x 14-1/16 inches x 15-5/8 inches) (including protrusions and cable cover) |
| Finish | Silver, salt resistant coating |
| Waterproof and Dust Proof | IP65 compliant |
| Maximum Permissible Wind Speed | 15 m/sec: Operates normally 50 m/sec: Operation possible 60 m/sec: No damage |
| Wiper | Installed as standard |
| Heater | Installed as standard |
| Defroster | Installed as standard |
| Controller Supported | AW-RP120G, AW-RP50, AK-HRP200G ・ It may be necessary to upgrade the version of the controller in order to support the unit. For details on upgrading, visit the support page on the following website. |
| Camera Unit | - |
| Imaging Sensors | 1/2.86-type Full-HD 3MOS |
| LENS | Optical 20x zoom/10x digital zoom, F1.6 to F3.4 (f=4.5 mm to 90 mm; 35 mm equivalent: 32.13 mm to 642.5 mm) |
| Focus | Switching between auto and manual |
| Focus Distance | Entire zooming range: 800 mm (2.62 ft) Wide end: 400 mm (1.31 ft) |
| Color separation optical system | 3MOS |
| MINIMUM ILLUMINATION | 2 lx (50 IRE, F1.6, 36 dB, without accumulation) |
| Horizontal Resolution | 1000 TV lines Typ (Center area) |
| Gain Selection | Auto, 0 dB to 42 dB (1 dB steps) 37 dB to 42 dB is Super Gain Mode |
| Frame Mix | 0 dB, 6 dB, 12 dB, 18 dB, 24 dB ・ This cannot be configured when the format is 1080/29.97p, 1080/23.98p, 1080/29.97PsF, 1080/23.98PsF, 1080/25p, or 1080/25PsF. ・ When [Iris Mode] or [Focus Mode] is set to [Auto], this cannot be set to 18 dB or 24 dB. |
| Electronic Shutter Speed | 59.94p/59.94i | 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 |
| Electronic Shutter Speed | 29.97p | 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 |
| Electronic Shutter Speed | 23.98p | 1/24, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 |
| Electronic Shutter Speed | 50p/50i | 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 |
| Electronic Shutter Speed | 25p | 1/25, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 |
| Synchro Scan | 59.94Hz | 60.15 Hz to 642.21 Hz (255 steps) |
| Synchro Scan | 50Hz | 50.15 Hz to 535.71 Hz (255 steps) |
| Gamma | HD, FILMLIKE1, FILMLIKE2, FILMLIKE3 0.30 to 0.75 (Manual setting) |
| WHITE BALANCE | AWB A, AWB B, ATW, 3200K, 5600K, VAR (2000K to 15000K) |
| Chroma Amount Variability | OFF, -99% to 40% |
| Scene File | Scene1, Scene2, Scene3, Scene4 |
| Intelligent Functions | Auto function for each of accumulation, gain, iris, electronic shutter, ND, and ATW |
| Output Format | 1080/59.94p, 1080/29.97p*1 , 1080/23.98p*2 , 1080/59.94i, 1080/29.97PsF*3 , 1080/23.98PsF*3 , 720/59.94p, 1080/50p, 1080/25p*1 , 1080/50i, 1080/25PsF*3 , 720/50p |
| Synchronization System | Internal/External synchronization (BBS/Tri-level sync) |
| Line Input Audio In 1/2 | Input Impedance | High impedance |
| Line Input Audio In 1/2 | Input | 2 channels, XLR balanced input ・ Input signal level: +4 dBu/0 dBu/-20 dBu (selectable in menu) ・ Volume variable range: -40 dB to +12 dB (can be changed in 1 dB steps in the menu) |
| Line Input Audio In 1/2 | Output | ・ 4 channels, superimposed over SDI output ・ Embedded audio output level: FS-12 dB: -12 dBFS, FS-18 dB: -18 dBFS, FS-20 dB: -20 dBFS (selectable in menu) ・ Sampling frequency: 48 kHz (synchronized to video) ・ Quantization bit rate: 24-bit (LPCM) ・ Audio compression format (IP): G.726, AAC-LC (High quality) |
| INPUT | - |
| Input Connector | 12V IN | XLR connector |
| Input Connector | G/L IN | BNC connector ・ BBS (Black Burst Sync), tri-level sync supported ・ Locking to a subcarrier is not possible with BBS. |
| Input Connector | Audio input | mini XLR connector (line input) #1: INPUT1 Common, #2: INPUT1 HOT, #3: INPUT1 COLD, #4: INPUT2 Common, #5: INPUT2 HOT, #6: INPUT2 COLD |
| OUTPUT | - |
| Video Output | HD-SDI OUT | SMPTE424/SMPTE292 standards 75 Ω (BNC x 2) ・ OSD output is possible from the SDI OUT 1/PM connector but not from the SDI OUT 2 connector. |
| INPUT/OUTPUT | - |
| Input/Output Connector | LAN | LAN connector for IP control/video output/audio output/ PoE++ power supply PoE++ (IEEE802.3bt Draft ver.2.0 standard) |
| Input/Output Connector | RS-422 | CONTROL IN RS-422A |
| Input/Output Connector | EXT | #1: DC GND, #2: HOT, #3: COLD, #4: 12V-OUT |
| Pan-tilt Head Unit | - |
| Installation Method | Stand-alone (Desktop) or suspended (Hanging) ・ To ensure safety, the unit must be secured using the mount bracket supplied. |
| Camera/Pan-Tilt Head Control | IP Connecting Cable | ・ When connecting through a PoE++ hub: LAN cable*4 (category 5e or above, straight cable), max. 100 m (328 ft) ・ When a PoE++ hub is not used: LAN cable*4 (category 5 or above, straight cable) max. 100 m (328 ft) |
| Camera/Pan-Tilt Head Control | AW Series Connecting Cable/Standard Protocol Connecting Cable | LAN cable*4 (category 5 or above, straight cable), max. 1000 m (3280 ft) |
| Pan/Tilt Operation Speed | Maximum speed 60°/s or higher |
| Panning range | ±175° ・ For suspended installations, the positions of the pins that determine the movement range must be changed. |
| Tilting Range | -30° to 210° ・ Depending on the pan or tilt position, the camera may be reflected in the image. ・ For suspended installations, the positions of the pins that determine the movement range must be changed. |
| Quietness | 60°/s (NC45 or less) |
| Vibration Correction | D.I.S.S. (Dynamic Image Stabilizing System) |
| Accessories | Hexagonal bolt M8 × 30 mm: 4 M8 washer : 4 Spring washer: 4 Cable cover : 1 Washer nozzle mount bracket: 1 Drop-prevention wire : 1 Drop-prevention wire mounting screw (with hexagonal socket, for unit) M4 × 10 mm : 1 |
| Note | *1: Native output *2: Over 59.94i output *3: For 1080/25PsF, 50i may be displayed on the monitor screen. Furthermore, for 1080/23.98PsF and 29.97PsF, 59.94i may be displayed on the monitor screen. *4 Use of an STP (shielded twisted pair) cable is recommended. ・ When connecting directly to a controller without an Ethernet hub, use a cross cable |