Roland VC-1-SH SDI to HDMI Video Converter

SKU: EDVC1SH

Conversion of video and audio signals from SDI input to HDMI output

Conversion of video and audio signals from SDI input to HDMI output

The VC-1-SH converter allows you to convert an SDI signal to HDMI, providing a more cost effective monitoring solution. This converter is also complimentary to the Roland V-40HD when you want to use an SDI camera as an input to the mixer

Lossless conversion in the palm of your hand. Awarding-winning multi-format conversion technology concentrated in a simplified mini-converter.

  • SDI to HDMI Conversion
  • Lossless image conversion
  • 3G ( Level A&B) /HD/ SD SDI
  • HDCP support
  • Selectable Channel for Embedded/De-Embedded Audio

Uncompromising commitment to picture quality.
The VC-1 series faithfully converts the original source with no change in color or brightness. It supports super-blacks and super-whites, and converts video from cameras and other source devices with all the originality intact.

Faithful reproduction of video characteristics.
The VC-1 series reproduces the video characteristics of the original source with no interlace artifacts, pixel shifting, or other conversion problems or signal errors. Jitter and return loss are at exceptional levels as well.

On-board reclocker
The VC-1 series features an on-board reclocker to compensate for attenuation of SDI signals carried over long distances. This makes it possible to receive camera-relay video while maintaining a high image quality.

Support for 1080p 3G-SDI.
Video signals beyond 1080i can be input and output. The VC-1 series supports both level A and level B 3G-SDI, letting, you connect a wide variety of 3G-SDI equipment. 1080i, 720p, and SD signals are accommodated automatically on connection.

High quality, smart design.
The exterior plating is aluminum at 2 millimeters thick. The connectors laid out inside the exterior plates are fastened to the chassis with nuts and bolts. This makes for a heavy-duty specification that can keep the connectors from coming loose even with frequent cable changes, as well as withstanding impact and drops. Every connector has an LED input indicator enabling you to confirm the status of signal transmission at a glance. The series is built for uncompromising reliability that includes accurate operation even over long periods of continuous use thanks to a design featuring exceptional heat-radiating efficiency.

A form factor that accommodates use on-the-go.
Cutaway areas in the exterior plate enable you to fasten the unit to tripods or the like using velcro or elastic ties. This makes for convenient placement and setup even during live on-site use.

Support for HDCP HDMI signals.
The VC-1 series is compliant with HDCP. For example, the VC-1-DL can take HDCP-applied HDMI input signals, apply frame synchronization or delay, and produce HDCP-applied HDMI output. This allows the VC-1 series to be used in any HDCP-based system with no worries.

Support for workflow combining audio and video.
Audio embedding and de-embedding features are provided (channel-selectable) in the VC-1 Series. The audio embedding feature lets you place audio signals from a different source into the video output. For example, when converting an SDI signal to HDMI, you can use the audio embedding feature to output high-quality audio from any of the SDI audio channels. Digital (AES/EBU) input and output are also supported, letting you exchange sound between professional audio equipment with no degradaton in signal. Analog input and output is supported as well making it possible to both monitor and input audio to/from a wide variety of equipment such

    - SDI to HDMI Conversion
    - Lossless image conversion
    - 3G ( Level A&B) /HD/ SD SDI
    - HDCP support
    - Selectable Channel for Embedded/De-Embedded Audio
*Up/Down/Cross, Frame rate, I/P, and Aspect ratio conversion are not supported.
Input
SDI Connector
BNC type x 1
Analog Audio Connector
1/4" TRS phone type ( balanced ) x 1 pair (L/R)
Digital Audio Connector
1/4" TRS phone type ( balanced ) x 1
(Combined use with Analog Audio R ch Connector )
Processing
Audio embedding
Audio de-embedding
Output
SDI Connector
BNC type x 1 ( Thru/Out )
HDMI Connector
Type A (19 pins ) x 1
Analog Audio Connector
1/4" TRS phone type ( balanced) x 1 pair (L/R)
Digital Audio Connector
1/4" TRS phone type ( balanced ) x 1
(Combined use with Analog Audio R ch Connector )
Input / Output Format
SDI Input Signal Standards
SMPTE 424M(SMPTE 425M-AB), SMPTE 292M, SMPTE 259M-C
SDI Input Video Format
1920x1080/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p/60i/59.94i/50i (Conforms to SMPTE 274M ), 1280x720/60p/59.94p/50p/30p/29.97p/25p (Conforms to SMPTE 296M ), 720x487/59.94i, 720x576/50i (Conforms to ITU-R BT.601-5 )
Audio Format
Linear PCM, 24 bits, 48 kHz, 16 ch (Conforms to SMPTE 299M, SMPTE 272M-C)
SDI Output Signal Standards
SMPTE 424M (SMPTE 425M-AB), SMPTE 292M, SMPTE 259M-C
SDI Output Video Format
1920x1080/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p/60i/59.94i/50i (Conforms to SMPTE 274M ), 1280x720/60p/59.94p/50p/30p/29.97p/25p (Conforms to SMPTE 296M),
720x487/59.94i, 720x576/50i (Conforms to ITU-R BT.601-5 )
SDI Output Audio Format
Linear PCM, 24 bits, 48 kHz, 16 ch (Conforms to SMPTE 299M, SMPTE 272M-C)
HDMI Output Video Format
1920x1080/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p/60i/59.94i/50i, 1280x720/60p/59.94p/50p/30p/29.97p/25p, 720x480/59.94i, 720x576/50i (Conforms to CEA-861-E)
HDMI Output Audio Format
Linear PCM, 24 bit, 48 kHz, 8 ch
Audio Input / Output
Analog Audio Input Level
+4dBu
Analog Audio Maximum Input Level
+24dBu
Analog Audio Input Impedance
110 ohms
Analog Audio Output Level
+4dBu
Analog Audio Output Impedance
600 ohms
Digital Audio Output Signal Format
AES3, 16/24 bits, 32/48 kHz, 2 ch
Digital Audio Output Impedance
110 ohms
Others
USB Connector
USB Type B (Hi-Speed USB) x 1
Power Supply
DC 9V
Power Consumption
8W
Operation Temperature
+0 to + 40 degrees Celsius
Accessories
AC adaptor, Power Cord, Rubber Foot x 4, Owner's Manual
Size and Weight
Width (W)
150 mm5-15/16 inches
Depth (D)
130 mm5-1/8 inches
Height (H)
30 mm1-3/16 inches
Weight
500 g1 lbs. 2 oz.

Awarding-winning multi-format conversion technology concentrated in a simplified mini-converter.

Roland's new video converters address the demand for high-quality, lossless video and audio converters for live/post production as well as installed systems.

Uncompromising commitment to picture quality.
The VC-1 series faithfully converts the original source with no change in color or brightness. It supports super-blacks and super-whites, and converts video from cameras and other source devices with all the originality intact.

On-board reclocker.
The VC-1 series features an on-board reclocker to compensate for
attenuation of SDI signals carried over long distances. This makes it possible to receive camera-relay video while maintaining a high image quality.

Faithful reproduction of video characteristics.
The VC-1 series reproduces the video characteristics of the original source with no interlace artifacts, pixel shifting, or other conversion problems or signal errors. Jitter and return loss are at exceptional levels as well.

Support for 1080p 3G-SDI.
Video signals beyond 1080i can be input and output. The VC-1 series supports both level A and level B 3G-SDI, letting you connect a wide variety of 3G-SDI equipment. 1080i, 720p, and SD signals are accommodated automatically on connection.

High quality and rugged construction for the rigors of front-line use.

High quality, smart design.
The exterior plating is aluminum at 2 millimeters thick. The connectors laid out inside the exterior plates are fastened to the chassis with nuts and bolts. This makes for a heavy-duty specification that can keep the connectors from coming loose even with frequent cable changes, as well as withstanding impact and drops. Every connector has an LED input indicator enabling you to confirm the status of signal transmission at a glance. The series is built for uncompromising reliability that includes accurate operation even over long periods of continuous use thanks to a design featuring exceptional heat-radiating efficiency.

A form factor that accommodates use on-the-go.
Cutaway areas in the exterior plate enable you to fasten the unit to tripods or the like using velcro or elastic ties. This makes for convenient placement and setup even during live on-site use.

Support for HDCP HDMI signals.
The VC-1 series is compliant with HDCP. For example, the VC-1-DL can take HDCP-applied HDMI input signals, apply frame synchronization or delay, and produce HDCP-applied HDMI output. This allows the VC-1 series to be used in any HDCP-based system with no worries.

Support for workflow combining audio and video.
Audio embedding and de-embedding features are provided (channel-selectable) in the VC-1 Series. The audio embedding feature lets you place audio signals from a different source into the video output. For example, when converting an SDI signal to HDMI, you can use the audio embedding feature to output high-quality audio from any of the SDI audio channels. Digital (AES/EBU) input and output are also supported, letting you exchange sound between professional audio equipment with no degradation in signal. Analog input and output is supported as well making it pos