Teradek 10-0572 Beam Receiver

SKU: BEAM572

Teradek Beam RX HD-SDI Video Receiver (no mount)
This is Beam Receiver with 3G-SDI Output and includes a dedicated bidirectional IFB channel. Beam is multicast capable to an unlimited number of Receivers over LAN and to up to 4 receivers over WiFi.

Technical Specs

BEAM Specification  
Video CompressionH.264 Baseline Profile Level 4.2 with de-interlacing 
System Latency90 - 110 millisecond delay between Transmitter and Receiver 
Wireless range2500ft +- 200ft 
Digital Video In/OutSD-SDI, HD-SDI, 3G-SDI 
Video PortTX: SDI input and looped Output, RX: SDI output 
Supported Video ResolutionsSMPTE244480i59.94 (NTSC), 480i60 (861-D)
 IEC61179-5576i50 (PAL)
 SMPTE 296M720p23.98, 720p24, 720p25, 720p29.97, 720p30, 720p50, 720p59.94, 720p60
 SMPTE 274M1080i50, 1080i59.94, 1080i60, 1080PsF23.98,1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
SDI ComplianceSMPTE 259M BI.656SDTV Digital Signal/Data Serial Digital Interface
 SMPTE 292M BT.11201.5Gb/s Signal/Data Serial Digital Interface
 SMPTE 425M3Gb/s Signal/Data Serial Digital Interface
 SMPTE 299M16bit Digital Audio Format for SMPTE 292M
 SMPTE 352MVideo Payload Identification for Digital Interfaces
BitrateRTSP ServerUp to 30Mbps
 MPEG2-TS ServerUp to 15Mbps
Main Digital Audio In/OutTX/RXSDI embedded audio: 48kHz 16-bit stereo linear PCM
Main Analog Audio OutRX48kHz 16-bit stereo linear PCM with mini stereo phone output jack
Talk-Back Analog Audio In/OutRX/TX8kHz 16-bit stereo linear PCM with mini stereo phone input/output jack
Radio PowerAggregate Power: 150mW (22dBm), 50mW (17dBm)/antenna 
Radio standardIEEE 802.11a/n: OFDM 
FrequenciesU-NII-1 (5.15-5.25 GHz), U-NII-3 (5.725-5.85 GHz) 
Antenna3T x 3R MIMO, 3 antennas per WiMi6200TW/W1Mi6200RW 
Security802.1x, 802,11i, WPA2, WPA and WEP 64/128 TKIP 128bit AES 
WPSWireless Protected Setup for easy set up and security configuration 
Ethernet LAN10/100 BASE-TX, RJ-45 jack 
MulticastWiFi: Up to 4 Receivers 
 LAN: No limit on number of receivers 
External ControlFull duplex RS422 serial port 
USBFactory reset, IP configuration or firmware upgrade without PC 
Power Input/ConsumptionDC 7V-17V, 12 Watt 
Dimensions (H x W x D) (mm)170 x 105 x 28 each board assembly (TX or RX) 
Weight (g)TX: 990g
RX: 610g
 
Operating Temperature0 deg C to 50 deg C 

Teradek Beam Rx with No Mount

Comes with:

1 Beam Rx
This comes with 1 Beam Rx with 3G-SDI Output and includes a dedicated bidirectional IFB channel.