Matrox ConvertIP DSS
Dual-channel SFP SDI-to-IP transmitter/receiver
Matrox ConvertIP DSS is a compact, standalone ST 2110 and IPMX transmitter/receiver device. Featuring 12G-SDI, genlock, one RJ45, and two SFP28 ports on a single device, ConvertIP DSS is designed for compressed or uncompressed workflows up to 25G and is optimal for an ultra-low latency experience. The device can receive power over Ethernet through its RJ45 connection, or it can be powered through an optional power supply unit. Both can be used simultaneously to deliver power redundancy.
Key Features
- 12G-SDI I/O
- Multi-network support
- 2x SFP28 (10G & 25G network support)
- 1x RJ45 (1G network support)
- Transmit or receive IP signals from a single device
- Standardized Discovery and Routing – based on AMWA NMOS IS-04 and IS-05 specifications
- Fanless design for quiet cooling
- PTP-derived genlock output support
- Genlock support for house sync input
- Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately) Compact form factor mounts easily to the back of a monitor
- Web-based user interface for managing ConvertIP devices
- Complimentary ConvertIP Manager Windows application for simple commission and deployment
Transport formats
- IPMX ready
- Colibri codec for visually lossless transmission of compressed of media over 1G network
- Optional JPEG XS codec license for SMPTE ST 2110-22 support (up to 2 Gbps)
- Glass-to-glass latencies of 1ms achievable
Connectivity
Video input
- TX mode: 1.5G, 3G, and 12G SDI
- RX mode: No input
Video output
- TX mode: No output
- RX mode: 1.5G, 3G, and 12G SDI
Video resolution
- HD and 4K resolutions (including broadcast)
Genlock
- Bi-Level genlock input support
VANC ancillary data processing
- Yes1
Audio input/output
- Up to 16 channels of audio embedded in SDI output signal
- Unbalanced analog stereo input via 1/8″ (3.5mm) jack1
- Line Level
Network connector
- 2x SFP28 cages for ST 2110 media and In-band control on LAN 1 and LAN 2
-10 GbE IEEE 802.3ae (10GBASE-SR/LR fiber module)
-25 GbE IEEE 802.3by (25GBASE-SR/CR/CR-S)
-25 GbE IEEE 802.3cc (25GBASE-LR) - LAN2 for redundancy mode only
- Dedicated RJ45 management network interface for control only with PoE+ (100/1000 Mbps)
RS-232
- Yes1
Control and management
- Matrox ConvertIP Command Center (web UI)
- Matrox ConvertIP Manager (software application)
Performance
Maximum video resolutions
- 4096 x 2160 60p
Bit depth and color space
- YCbCr 4:2:2 10-bit
- SDR/HDR1
Video and Audio Processing
Video scaling
- High Quality multi-tap 10-bit Up/Down Scaler
Video deinterlacing
- Yes1
Color space conversion
- Yes
HDCP support
- Not applicable
Encoding Formats
Video
Uncompressed
- HD 3 Gbps and 4K 12 Gbps
Default compressed bitrates: 200 Mbps for HD content, 820 Mbps for 4K content - Colibri codec included
4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps - JPEG-XS codec upgrade required3
- 4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps
Audio
- Uncompressed PCM (~1 Mbps/ch)
Latency
- Less than a 1/4 frame (<4 ms)
Network
Network standard
- RJ45 providing 1 GbE or 2.5 GbE Base-T Ethernet
IP addressing
- IPv4
- IPv61
- DHCP (default) and static IP
Supported protocols
- SMPTE ST 2110 (-10, -20, -21, -22, -30, -401)
- SMPTE 2059 (-1, -2)
- IPMX ready
Redundancy
- Yes (ST 2022-7)
Command and control
- HTTPS over TCP
Discovery, registration and control
- NMOS discovery and control according to standards IS-04 v 1.2 and 1.3 and IS-05 1.0 and 1.1
PoE+
- Yes (IEEE 802.3 at Type 2)
Physical
Product dimensions
- 7.13 (D) x 7.53 (W) x 1.42 (H) inches
- 181 (D) x 191 (W) x 36 (H) mm
Unit weight
- 1.70 lbs / 770 g
Cooling
- Fanless
Power
- Device: Input: 12 volts, max 18 Watts
- PoE+
- Optional PSU (sold separately)
-Line Voltage: 100-240 V a.c., 0.5A
-Frequency: 50-60 Hz
-Input: IEC320-C14
-Output: DIN4 locking power connector
Hardware and Software
Hardware included
- ConvertIP DSS appliance
Optional hardware
- ConductIP NMOS-based routing solution (Part #: CDCTIP-MRA)
Accessories (sold separately)
- ConvertIP power supply unit (Part #: EPS40WKIT-NA, EPS40WKIT-EU, EPS40WKIT-UK, EPS40WKIT-AU, EPS40W-10PK)4
- Rackmount kit (Part #: RMK-19TR-A)5
- Angled bracket kit (Part #: RMK-6BRKT-A)
- NRG redundant power supply unit (Part #: NRG-5-1DB or NRG-5-2DB)
Optional software
- JPEG-XS codec license
- Crestron Module to expand existing controlled environments
Environmental
Operating conditions
- Temperature: 0 to 45 degrees Celsius
- Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m)
- Humidity: 20% to 80% non-condensing
Storage conditions
- Temperature: -40 to 70 degrees Celsius
- Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m)
- Humidity: 5% to 95% non-condensing
General
EMC/EMI device class
- Class A
EMC/EMI compliance
- CE (EU)
- FCC (USA)
- ICES-003 (Canada)
- KC (Korea)
- RCM (Aus/NZ)
Environmental compliance
- China RoHS
- EU RoHS
- REACH
Warranty
- Three-year limited warranty with free online or telephone support