Matrox ConvertIP DRH
Dual-channel RJ45 HDMI-to-IP transmitter/receiver
Matrox ConvertIP DRH is a compact, standalone ST 2110 and IPMX transmitter/receiver device. Featuring HDMI I/O and three RJ45 ports on a single device, ConvertIP DRH is designed for 1G AV workflows and is optimal for an ultra-low latency experience. The device can receive power over Ethernet through its RJ45 connection, or it can be powered through an optional power supply unit. Both can be used simultaneously to deliver power redundancy.
Key features
- HDMI I/O
- Multi-network support
- 2x RJ45 (1G & 2.5G network support for Media and Control)
- 1x RJ45 (1G network support for independent control network)
- Transmit or receive IP signals from a single device
- Standardized Discovery and Routing – based on AMWA NMOS IS-04 and IS-05 specifications
- Fanless design for quiet cooling
- Zero-latency HDMI loop-out
- Power redundancy through PoE+ and locking AC power connector (optional power supply cable sold separately)
- Compact form factor mounts easily to the back of a monitor
- Web-based user interface for managing ConvertIP devices
Complimentary ConvertIP Manager Windows application for simple commission and deployment
Transport formats
- IPMX ready
- Colibri codec for visually lossless transmission of compressed of media over 1G network
- Optional JPEG XS codec license for SMPTE ST 2110-22 support (up to 2 Gbps)
- Glass-to-glass latencies of 1ms achievable
Connectivity
Video input
- 1x HDMI
Video output
- 1x HDMI (zero latency pass-through in TX mode)
Video resolution
- Most desktop resolutions up to 4Kp60
Audio input/output
- Up to 8 channels of audio embedded in HDMI signal
- Unbalanced analog stereo input via 1/8″ (3.5mm) jack1
- Line Level
Network connector
3x RJ45 ports
- LAN 1 for Media and Control with PoE+ (1/2.5G)
- LAN 2 for redundant Media and Control (1/2.5G)
- Control LAN for Control data only (100/1000 Mbps)
RS-232
- Yes
Control and management
- Matrox ConvertIP Command Center (web UI)
- Matrox ConvertIP Manager (software application)
Performance
Maximum video resolutions
- 4096 x 2160 60p
*All standard desktop GPU resolutions supported
Bit depth and color space
- YCbCr 4:2:0 10-bit1 and 8-bit1
- YCbCr 4:2:2 10-bit
- RBG 4:4:4 8-bit
- SDR/HDR
Video and Audio Processing
Video scaling
- High Quality multi-tap 10-bit Up/Down Scaler
Video deinterlacing
- Yes
Color space conversion
- Yes
HDCP support
- Yes
Encoding Formats
Video
Default compressed bitrates: 200 Mbps for HD content, 820 Mbps for 4K content
- Colibri codec included
-4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps - JPEG-XS codec upgrade required3
-4:2:2 10-bit YUV and 4:4:4 8-bit RGB. 100 to 2000 Mbps
Audio
- Uncompressed PCM (~1 Mbps/ch)
Latency
- Less than a 1/4 frame (<4 ms)
Network
IP addressing
- IPv4
- IPv6
- DHCP (default) and static IP
Supported protocols
- SMPTE ST 2110 (-10, -22, -30)
- SMPTE 2059 (-1, -2)
- IPMX ready
Redundancy
- Yes (ST 2022-7)
Command and control
- HTTPS over TCP
Discovery, registration and control
- NMOS discovery and control according to standards IS-04 v 1.2 and 1.3 and IS-05 1.0 and 1.1
PoE+
- Yes (IEEE 802.3at Type 2)
Physical
Product dimensions
- 7.13 (D) x 7.53 (W) x 1.42 (H) inches
- 181 (D) x 191 (W) x 36 (H) mm
Unit weight
- 1.40 lbs / 635 g
Cooling
- Fanless
Power
- Device: Input: 12 volts, max 18 Watts
- PoE+
- Optional PSU (sold separately)
-Line Voltage: 100-240 V a.c., 0.5A
-Frequency: 50-60 Hz
-Input: IEC320-C14
-Output: DIN4 locking power connector
Hardware and Software
Hardware included
- ConvertIP DRH appliance
Optional hardware
- ConductIP NMOS-based routing solution (Part #: CDCTIP-MRA)
Accessories (sold separately)
- ConvertIP power supply unit (Part #: EPS40WKIT-NA, EPS40WKIT-EU, EPS40WKIT-UK, EPS40WKIT-AU, EPS40W-10PK)4
- Rackmount kit (Part #: RMK-19TR-A)5
- Angled bracket kit (Part #: RMK-6BRKT-A)
- Secure cable solution for HDMI (Part #: SK-SLND-4)
- NRG redundant power supply unit (Part #: NRG-5-1DB or NRG-5-2DB)
Optional software
- JPEG-XS codec license
- Crestron Module to expand existing controlled environments
Environmental
Operating conditions
- Temperature: 0 to 45 degrees Celsius
- Altitude: 650 hPa (3,580 m) to 1,013 hPa (0 m)
- Humidity: 20% to 80% non-condensing
Storage conditions
- Temperature: -40 to 70 degrees Celsius
- Altitude: 192 hPa (12,000 m) to 1,020 hPa (-50 m)
- Humidity: 5% to 95% non-condensing
General
EMC/EMI device class
- Class A
EMC/EMI compliance
- CE (EU)
- FCC (USA)
- ICES-003 (Canada)
- KC (Korea)
- RCM (Aus/NZ)
Environmental compliance
- China RoHS
- EU RoHS
- REACH
Warranty
- Three-year limited warranty with free online or telephone support